Home / USACE Publications / Engineer Manuals

Engineer Manuals

   Search   Reset Search  
Enter Search Value:
- without any prefix or suffix to find all records where a column contains the value you enter, e.g. Net
- with | prefix to find all records where a column starts with the value you enter, e.g. |Network
- with | suffix to find all records where a column ends with the value you enter, e.g. Network|
- with | prefix and suffix to find all records containing the value you enter exactly, e.g. |Network|

Pub Number Proponent Title Pub Date Latest Review Info
EM 1110-1-1000 CECW-CE Photogrammetric and LiDAR Mapping 4/30/2015 Errata 01 Sheet added on 03/25/2016; This Manual supersedes EM 1110-1-1000, dated 1 July 2002.
EM 1110-1-1005 CECW-CE Control and Topographic Surveying 1/1/2007 This manual provides guidance on performing detailed site surveys of military installation facilities and civil works projects.
EM 1110-1-1802 CECW-EG Geophysical Exploration for Engineering and Environmental Investigations 8/31/1995 Provides an introduction to geophysical exploration for engineering, geological, and environmental (to include Hazardous, Toxic and Radioactive Waste (HTRW)) investigations.
EM 1110-1-1904 CECW-EG Settlement Analysis 9/30/1990 Provides guidelines for calculations of vertical displacements and settlement of soil under shallow foundations supporting various types of structures and under embankments.
EM 1110-1-1905 CECW-EG Bearing Capacity of Soils 10/30/1992 Provides guidelines for calculation of the bearing capacity of soil under shallow and deep foundations supporting various types of structures and embankments.
EM 1110-1-2009 CECW-EG Architectural Concrete 10/31/1997 Provides guidance for the design and construction of architectural concrete, including planning and design, forms, materials and proportions, batching and transporting, placement, curing and form removal, exposed aggregate surfaces, finishing, and quality assurance.
EM 1110-1-2907 CECW-EG Rock Reinforcement 2/15/1980 Outlines techniques ,and procedures of rock reinforcement for underground and surface structures in civil engineering works.
EM 1110-1-2908 CECW-EG Rock Foundations 11/30/1994 Provides technical criteria and guidance for design of rock foundations for civil works or similar large military structures.
EM 1110-1-3500 CECW-EG Chemical Grouting 1/31/1995 Provides information and guidance for the investigation and selection of materials, equipment, and methods to be used in chemical grouting in connection with construction projects.
EM 1110-1-400 CECW-CO Recreation Facility and Customer Services Standards 11/1/2004 This document provides general guidance for the rehabilitation of existing and the design and construction of new recreation areas and facilities, the provision of customer services, and recreation program evaluation activities at recreation areas managed by the U.S. Army Corps of Engineers (USACE).
EM 1110-1-4011 CEMP-RA Construction Quality Assurance (CQA) Plan - Requirements for Hazardous Waste Landfills 10/1/1999 This engineer manual transmits a document which describes CQA inspection requirements for hazardous waste landfill covers and liners. The appendix of this document is a template for landfill CQA plans to assist designers in incorporating the important aspects of CQA.
EM 1110-1-4012 CEMP-CE Precipitation/Coagulation/Flocculation 11/15/2001 This Engineer Manual (EM) was written to provide guidance for determining if precipitation, coagulation, flocculation (P/C/F) systems are applicable and guidance on how to properly design, specify, and operate P/C/F systems to remove dissolved heavy metals from aqueous waste streams.
EM 1110-1-501 CEMP-ET, DAEN-CWE-BU, DAEN-MPE-D Process Design Manual for Land Treatment of Municipal Wastewater 5/20/1982 Provides a description of the basic principles of land treatment and to present a rational procedure for the planning and design of land treatment systems.
EM 1110-2-1003 CECW-CE I CECW-OD Hydrographic Surveying 11/30/2013 this manual provides technical guidance for specifying requirements and performing hydrographic survey of USACE river and harbor navigation projects, water control projects, and shore protection projects.
EM 1110-2-1009 CECW-EE Structural Deformation Surveying 2/28/2018 This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures. Accuracy, procedural, and qual¬ity con¬trol stan¬dards are de¬fined for monitoring displacements in hydraulic structures.
EM 1110-2-1406 CECW-EH Runoff from Snowmelt 3/31/1998 Provides guidance for computing basin snowmelt runoff as is necessary in the design and operation of USACE water control projects.
EM 1110-2-1601 CECW-EH-D Hydraulic Design of Flood Control Channels 7/1/1991 Presents procedures for the design analysis and criteria of design for improved channels that carry rapid and/or tranquil flows.
EM 1110-2-1603 CECW-ED-H Hydraulic Design of Spillways 1/16/1990 Provides guidance for the hydraulic design of spillways for flood control or multi dams.
EM 1110-2-1606 CECW-EH-D Hydraulic Design - Surges in Canals - Change 1 3/1/1949 Problem of surges which occur in navigation canals as a result of lock operations, since a full discussion of other unsteady flow phenomena which may occur in open channels would be feasible only in a large treatise.
EM 1110-2-1613 CECW-CE Hydraulic Design of Deep Draft Navigation Projects 5/31/2006 Provides design guidance for improving deep-draft navigation projects. The design goal applicable to project development is to provide a safe, efficient, environmentally sound, and cost-effective waterway for ships and other vessels. An economic objective is to provide for these goals while minimizing and balancing the initial construction costs and future maintenance costs.
EM 1110-2-1701 CECW-EH Hydropower 12/31/1985 Provides guidance on the technical aspects of hydroelectric power studies, from the preauthorization level through the General Design Memorandum (GDM) stage.
EM 1110-2-1901 CECW-EG Seepage Analysis and Control for Dams 9/30/1986 This manual presents the fundamental design principles and guidance concerning seepage considerations for design of new dams and the evaluation of existing projects.
EM 1110-2-1902 CECW-EW Slope Stability 10/31/2003 This engineer manual (EM) provides guidance for analyzing the static stability of slopes of earth and rock-fill dams, slopes of other types of embankments, excavated slopes, and natural slopes in soil and soft rock. Methods for analysis of slope stability are described and are illustrated by examples in the appendixes.
EM 1110-2-1911 CECW-ED Construction Control for Earth and Rock-Fill Dams 9/30/1995 Presents principles and methods for construction control of earth and rock-fill dams.
EM 1110-2-1913 CECW-EG Design and Construction of Levees 4/30/2000 Presents basic principles used in the design and construction of earth levees.
EM 1110-2-2000 CECW-EG Standard Practice for Concrete for Civil Works Structures Proponent: CECW-EG 3/31/2001 Provides information and guidance for the investigation and selection of concrete materials for civil works concrete structures. Elements discussed include design studies and reports, preparation of contract plans and specifications, construction preparation, and concrete construction quality verification.
EM 1110-2-2002 CECW-EG Evaluation and Repair of Concrete Structures 6/30/1995 Provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure.
EM 1110-2-2006 CECW-EG Roller-Compacted Concrete 1/15/2000 Provides information and guidance on the use of roller compacted concrete (RCC) in dams and other civil works structures. Elements discussed include investigation and selection of materials, mixture proportioning, material properties, design and construction considerations, construction methods and equipment, Government Quality Assurance/Contractor Quality Control, and performance.
EM 1110-2-2007 CECW-ED Structural Design of Concrete Lined Flood Control Channels 4/30/1995 Provides guidance for the design of reinforced, concrete lined flood control channels which convey rapid and tranquil storm water flows to prevent flooding.
EM 1110-2-2100 CECW-CE Stability Analysis of Concrete Structures 12/1/2005 Provides guidance for stability analysis of concrete gravity structures.
EM 1110-2-2102 CECW-EG Water stops and Other Preformed Joint Materials for Civil Works Structures 9/30/1995 Provides guidance for the selection and use of water stops and other preformed joint materials for preventing passage of excessive amounts of water, water-borne matter, gases, other fluids, and other unwanted substances into or through the joints of concrete structures.
EM 1110-2-2201 CECW-ED Arch Dam Design 5/31/1994 Provides information and guidance on the design, analysis, and construction of concrete arch dams.
EM 1110-2-2300 CECW-EG General Design and Construction Considerations For Earth and Rock-Fill Dams 7/30/2004 This manual presents fundamental principles underlying the design and construction of earth and rock-fill dams. The general principles presented herein are also applicable to the design and construction of earth levees.
EM 1110-2-2302 CECW-EG Construction with Large Stone 10/24/1990 This manual establishes criteria and presents guidance for the selection, evaluation, and use of large-stone materials in construction.
EM 1110-2-2400 CECW Structural Design and Evaluation of Outlet Works 6/2/2003 Provides guidance for the planning and structural design and analysis of intake structures and other outlet works features used on US Army Corps of Engineers projects for flood control, water supply, water quality and temperature control, recreation, or hydropower.
EM 1110-2-2503 CECW-EP Design of Sheet Pile Cellular Structures Cofferdams and Retaining Structures 6/11/1990 Provisions for the design of sheet pile cellular cofferdams are set forth in ER 1110-2-2901.
EM 1110-2-2607 CECW-ED Planning and Design of Navigation Dams 7/31/1995 This manual is issued for guidance of individuals and elements within the Corps of Engineers engaged in the structural planning, layout, and design of navigation dams for civil works projects. The structural design of gates is not covered in this manual.
EM 1110-2-2611 CECW-EW Engineering for Prefabricated Construction of Navigation Projects 2/1/2004 Provides guidance to help Districts in developing innovative plans to use precast concrete segments and other prefabricated elements for construction of navigation projects.
EM 1110-2-2906 CECW-ED Design of Pile Foundations 1/15/1991 Provides information, foundation exploration and testing procedures, load test methods, analysis techniques, allowable criteria, design procedures, and construction consideration for the selection, design, and installation of pile foundations.
EM 1110-2-3001 CECW-ED Planning and Design of Hydroelectric Power Plant Structures 10/10/2008 Provides guidance for structural planning and design of hydroelectric power plants.
EM 1110-2-3104 CECW-ED Structural and Architectural Design of Pumping Stations 6/30/1989 Presents the primary features common to pumping station facilities intended for interior drainage on civil works flood protection projects and to present guidance for their architectural and structural design.
EM 1110-2-3400 CECW-EE Painting: New Construction and Maintenance 4/30/1995 Provides painting guidance to engineering, operations, maintenance, and construction personnel and other individuals responsible for the protection of U.S. Army Corps of Engineers (USACE) structures.
EM 1110-2-3401 CECW-ET Thermal Spraying: New Construction and Maintenance 1/29/1999 Provides guidance on thermal spray coating systems to engineering, operations, maintenance, and construction personnel and other individuals responsible for the protection of U.S. Army Corps of Engineers (USACE) civil works structures.
EM 1110-2-3600 CECW-CE Management of Water Control Systems 10/10/2017 This publication supersedes EM 1110-2-3600 30 November 1987. This Engineer Manual (EM) provides guidance to field offices for water manage-ment at all U.S. Army Corps of Engineers (Corps) owned and Corps-operated reservoirs, locks, dams, and other water control projects in which water storage is managed and operated for multi-ple authorized purposes such as flood risk management, navigation, and other uses.
EM 1110-2-4300 CECW-ED Instrumentation for Concrete Structures 11/30/1987 Provides guidance and information related to the instrumentation of concrete structures and the measurement of structural behavior.
EM 1110-2-501 CECW-ET Design, Construction, and Operation - Small Wastewater Systems 2/1/1999 This manual is intended to provide guidance and criteria for the design and selection of small-scale wastewater treatment facilities.
EM 1110-2-503 CECW-ET Design of Small Water Systems 2/27/1999 Provides guidance and criteria for the design of small water supply, treatment, and distribution systems.
EM 1110-2-504 CECW Engineering and Design - Land Treatment Systems Operation and Maintenance 11/30/1983 This manual has two basic s It can be used by the operators of existing and future systems to supplement the operation and maintenance (0&M) information furnished to them-on the mechanical elements in their systems It can also be used as a guide for the preparation of future 0&M manuals .
EM 1110-2-6050 CECW-ET Response Spectra and Seismic Analysis for Concrete Hydraulic Structures 6/30/1999 Describes the development and use of response spectra for the seismic analysis of concrete hydraulic structures. The manual provides guidance regarding how earthquake ground motions are characterized as design response spectra and how they are then used in the process of seismic structural analysis and design.
EM 1110-2-6051 CECW-EW Time-History Dynamic Analysis of Concrete Hydraulic Structures 12/22/2003 This manual describes procedures for the linear-elastic time-history dynamic analysis and development of acceleration time-history dynamic analysis for seismic design and evaluation of concrete hydraulic structures (CHS).
Page 1  of  2 First Previous [1] 2 Next Last