US Army Corps of Engineers
Official Publications of HQ USACE

Engineer Manuals

Enter Search Value:
- without any prefix or suffix to find all records where a column contains the value you enter, e.g. Net
- with | prefix to find all records where a column starts with the value you enter, e.g. |Network
- with | suffix to find all records where a column ends with the value you enter, e.g. Network|
- with | prefix and suffix to find all records containing the value you enter exactly, e.g. |Network|

Pub Number Proponent Title Pub Date Latest Review Info
EM 1110-1-2009 CECW-EG Architectural Concrete 10/31/1997 Provides guidance for the design and construction of architectural concrete, including planning and design, forms, materials and proportions, batching and transporting, placement, curing and form removal, exposed aggregate surfaces, finishing, and quality assurance.
EM 1110-1-2907 CECW-EG Rock Reinforcement 2/15/1980 Outlines techniques ,and procedures of rock reinforcement for underground and surface structures in civil engineering works.
EM 1110-1-2908 CECW-EG Rock Foundations 11/30/1994 Provides technical criteria and guidance for design of rock foundations for civil works or similar large military structures.
EM 1110-1-2909 CECW-CE Geospatial Data and Systems 9/1/2012 Provides detailed technical guidance and procedures for compliance with the policy in Engineer Regulation (ER) 1110-1-8156, Policies, Guidance, and Requirements for Geospatial Data and Systems, which establishes general criteria for the use and development of geospatial technologies throughout the U.S. Army Corps of Engineers (USACE).
EM 1110-1-3500 CECW-EG Chemical Grouting 1/31/1995 Provides information and guidance for the investigation and selection of materials, equipment, and methods to be used in chemical grouting in connection with construction projects.
EM 1110-1-4000 CEMP-RT/CECW-EG Monitoring Well Design, Installation, and Documentation at Hazardous Toxic, and Radioactive Waste Sites 11/1/1998 This Engineer Manual (EM) provides the minimum elements for consideration in the design, installation, and documentation of monitoring well placement (and other geotechnical activities) at projects known or suspected to contain chemically hazardous, toxic, and/or radioactive waste.
EM 1110-1-4001 CEMP-ET Soil Vapor Extraction and Bioventing 6/3/2002 Provides practical guidance for the design and operation of soil vapor extraction (SVE) and Bioventing (BV) systems.
EM 1110-1-4006 CEMP-RT Removal of Underground Storage Tanks (USTs) 9/30/1998 Provides practical guidance for removal of underground storage tanks (USTs). The manual addresses site evaluation, monitoring, testing, removal, and site restoration.
EM 1110-1-4007 CEMP-RA Safety and Health Aspects of HTRW Remediation Technologies 8/15/2003 Identifies and analyzes generic safety and health hazards for 25 remediation technologies used in clean up operations at hazardous toxic, and radioactive waste (HTRW) sites throughout the country.
EM 1110-1-4008 CEMP-RA Liquid Process Piping 5/5/1999 Provides information for the design of liquid process piping.
EM 1110-1-4010 CEMP-R Multi-Phase Extraction 6/1/1999 This Engineer Manual (EM) is intended to provide detailed guidance on all phases of the remediation projects involving Multi-phase Extraction (MPE).
EM 1110-1-4011 CEMP-RA Construction Quality Assurance (CQA) Plan - Requirements for Hazardous Waste Landfills 10/1/1999 This engineer manual transmits a document which describes CQA inspection requirements for hazardous waste landfill covers and liners. The appendix of this document is a template for landfill CQA plans to assist designers in incorporating the important aspects of CQA.
EM 1110-1-4012 CECW-ET Precipitation/Coagulation/Flocculation 11/15/2001 This Engineer Manual (EM) was written to provide guidance for determining if precipitation, coagulation, flocculation (P/C/F) systems are applicable and guidance on how to properly design, specify, and operate P/C/F systems to remove dissolved heavy metals from aqueous waste streams.
EM 1110-1-4015 CEMP-CE Design: In Situ Thermal Remediation 8/28/2009 This Engineer Manual (EM) provides guidance and background for the appropriate screening and selection of in situ thermal remediation (ISTR) technologies, including steam enhanced extraction injection; electrical resistivity heating, and thermal conductive heating.
EM 1110-1-4016 CEMP-CE Landfill Off-Gas Collection and Treatment Systems 5/30/2008 This EM establishes criteria and guidance for landfill off-gas collection and treatment systems.
Page 3  of  12 First Previous 1 2 [3] 4 5 6 7 8 9 10 Next Last